手板是一個產品在研發制作時必不可少的環節，只有這樣才能保障產品質量，那么手板模型研發制作必不可少的準備工作有什么呢？

　　Hand model is an essential link in the development and production of a product, only in this way to ensure product quality, so hand model research and development and production is essential to prepare what?

　　在制作手板前，可以提前做好加工準備，防止倉促考慮不周，影響加工質量和周期； 與客戶溝通好，簽訂加工協議，安排加工日期； 噴油前考慮油漆的厚度是否與圖紙要求的尺寸不同； 考慮粗加工和精加工余量，防止內外開裂和不一致，產品外觀有加工質感。

　　In the production of hand, can be prepared for processing in advance, to prevent hasty consideration, affect the processing quality and cycle; Communicate well with customers, sign processing agreement, arrange processing date; Consider whether the thickness of the paint is different from the size required by the drawing before oil injection; Considering the rough processing and finishing allowance, to prevent internal and external cracking and inconsistency, the appearance of the product has processed texture.

　　透明手板采用圖紙要求的材料制作，內壁光滑，不能有機床加工過的刀紋； 必須按照設計圖紙的要求，達到粗糙度標準； 應為設計產品設定成型工藝和工藝，不得因手板加工難度而中途更改設計。

　　Transparent hand plate is made of the material required by the drawing, the inner wall is smooth, and there can be no knife grain processed by machine tool; Roughness standards must be met in accordance with the requirements of the design drawings; Should design the product to set up the molding process and technology, not due to the difficulty of handboard processing and midway change of design.

　　另外，濟南手板模型開發生產完成后，還需要進行檢驗，否則質量不清楚。 然后，在原型模型的加工過程中，大家需要檢查總成是否安裝牢固。 很多人在驗收的時候不注意這個環節，導致后期出現很大的零件質量問題。 因此，驗收時必須對零件的裝配有很好的了解。

　　In addition, after the development and production of hand model, it is also necessary to test, otherwise the quality is not clear. Then, during the prototyping process, check that the assembly is securely installed. Many people do not pay attention to this link in the acceptance, resulting in great parts quality problems in the later period. Therefore, the acceptance of parts must have a good understanding of the assembly.

　　在接受手板檢驗時，一定要檢查手板的公差是否正確，否則很容易使手板與設計圖不符，違背了制作人偶模型的初衷。 而且，還要檢查它的儲存條件是什么，否則原型模型的損壞很容易讓研發團隊和客戶不喜歡，影響很大。

　　When accepting the hand inspection, it is necessary to check whether the tolerance of the hand is correct, otherwise it is easy to make the hand is inconsistent with the design drawing, contrary to the original intention of making the doll model. Also, check what the storage conditions are, otherwise the damage of the prototype model is easily disliked by the r&d team and customers, which has a great impact.

　　還要看原型模型的質量是否合格。 如果質量不達標，會對后續使用造成很大影響，而且很難做出相應的補救。 因此，在檢查自己的原型模型時，應該對以上幾個方面有詳細的了解，否則只會影響自己原型模型的效果。

　　It also depends on the quality of the prototype model. If the quality is not up to standard, it will have a great impact on the subsequent use, and it is difficult to make corresponding remedy. Therefore, when checking your prototype model, you should have a detailed understanding of the above aspects, otherwise it will only affect the effect of your prototype model.

　　手板模型研發制作必不可少的準備工作以及驗收的注意事項便是如此了，都做好了才能有效的提升手板制作的效率以及節省時間成本。更多內容就來網站m.debangboya.com進行咨詢吧。

　　Hand model research and development and production of essential preparation and acceptance notes is such, are done to effectively improve the efficiency of hand plate production and save time and cost. More content to the website for consultation.